Using The Remote Control In Wired Operation - NEC NP-PH1400U User Manual

Using the Remote Control in Wired Operation

Connect one end of the remote cable to the REMOTE mini jack and the other end to the remote jack on the remote
control.
NOTE:
• When a remote cable is inserted into the REMOTE jack, the remote control does not work for infrared wireless communication.
• When a remote cable is inserted into the REMOTE jack, the [POWER-SAVING] and [NETWORK STANDBY] functions in [STANDBY
MODE] will not work.
• Power will not be supplied to the remote control from the projector via the REMOTE jack. Battery is needed when the remote
control is used in wired operation.
REMOTE
11
1. Introduction
Remote Jack