Shooting Mode; M Scene Recognition; B Auto; I Continuous Shooting - FujiFilm FinePix S8630 Owner's Manual

Shooting Mode

Choose a shooting mode according to the scene or type of subject. To choose a shooting mode, rotate
the mode dial to the desired setting (P 5). The following modes are available:

M SCENE RECOGNITION

M
SCENE RECOGNITION
The camera automatically analyzes the composi-
tion and selects the appropriate scene mode ac-
cording to the subject and shooting conditions
(P 14).
B

B AUTO

AUTO
Choose for crisp, clear snapshots. This mode is
recommended in most situations.

I CONTINUOUS SHOOTING

I
CONTINUOUS SHOOTING
Capture motion in a series of pictures. Use the R
CONTINUOUS option in the shooting menu to
choose a continuous mode.
20
c Cautions
• Focus and exposure are determined by the first frame
in each series. The flash turns off automatically; the
previously-selected flash mode is restored when the
shooting mode is changed.
• Frame rate varies with shutter speed, shooting condi-
tions, and the number of pictures in each burst.
• The number of pictures that can be taken in a single
burst varies with the scene and camera settings. The
number of pictures that can be recorded depends on
the memory available.
• If the self-timer is used when L and N are selected,
only one picture will be taken when the shutter but-
ton is pressed.
• At a setting of J, white lines may appear in bright
areas of the image; these can be avoided by choosing
K mode.