Number Of Available Frames; Using Af/Ae Lock - FujiFilm FinePix F401 Owner's Manual

TAKING PICTURES (
|
q MODE

Number of Available Frames

The number of available shots is displayed on
the LCD monitor.
G
!
See P.44 for information on changing the resolution.
G
!
The default resolution " y " set at shipment is
I Standard number of shots per SmartMedia
Because the amount of data recorded varies depending on the subject, the number of available shots may not
decrease when recording ends, or may decrease by 2 frames. The discrepancy between the standard number of
available shots and the actual number of available shots increases in proportion to the capacity of the SmartMedia.
Quality 3 4M • F 3 4M
2304 × 1728
No. of recorded pixels
Image Data Size Approx. 1.6MB Approx. 790KB
2
MG-4S (4MB)
4
MG-8S (8MB)
9
MG-16S/SW (16MB)
20
MG-32S/SW (32MB)
MG-64S/SW (64MB) 40
MG-128SW (128MB) 81
✽ Number of available shots displayed on the camera for a new SmartMedia formatted in the camera.
26
AUTO MODE )
1 .
• N 2 2M 1 1M
1600 × 1200 1280 × 960
Approx. 390KB Approx. 320KB
4 9 12
9 19 25
19 39 49
39 79 99
79 159 198
159 319 398

USING AF/AE LOCK

q MODE
1
４９ ４９
In a shot with this type of composition, the
subjects (two people in this case) are not in the
AF frame. If the shot is taken at this point, the
subjects will not be in focus.
! 0.3M
640 × 480
Approx. 130KB
30
61
122
N
AF (Autofocus)/AE (Auto exposure) Lock
247
On the FinePix F401, when you press the shutter button down half way, the focus and exposure settings
497 are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if you want
to set the exposure before you compose the final shot, lock the AF and AE settings and then compose
997
and shoot your picture to get the best results.
2
４９ ４９
Move the camera slightly so that one of the
subjects in the AF frame.
Continued on next page...
N
４９ ４９
2
27