Ttop 4-Frame Continuous Shooting; Final 4-Frame Continuous Shooting; Fsensitivity - FujiFilm FinePix F401 Owner's Manual

t CONTINUOUS SHOOTING
PHOTOGRAPHY MENU
t Top 4-frame Continuous Shooting
ＳＴＯＲＩＮＧ ＳＴＯＲＩＮＧ
In this mode, you can shoot up to 4 frames at
intervals as short as 0.3 seconds. When you
take the shots, the photographed images are
displayed and automatically recorded.
48

} Final 4-frame Continuous Shooting

Max. 25 shots
Press shutter Release shutter
button button
× × × × 1 × 1 2 3 4
4 frames
This mode allows you to release the shutter up to
25 times (at intervals as short as 0.3 seconds)
and record the last 4 frames. If you take your
finger off the shutter button before 25 shots have
been taken, the camera records the final 4 frames
shot before you released the shutter button.
If there is insufficient capacity on the SmartMedia,
the number of shots that could be recorded just
before the shutter button was released is taken.
f SENSITIVITY
PHOTOGRAPHY MENU
ＩＳＯ ＩＳＯ
１６００ １６００
８００ ８００
４００ ４００
２００ ２００
This mode can be selected in the " W " photography mode.
Use this setting when you want to take bright pictures
indoors without using a flash or when you want to use
a fast shutter speed (to prevent camera shake, etc.).
h Settings: 200 (standard), 400, 800, 1600
G
!
While selecting a higher sensitivity setting will allow you
to take pictures in darker locations, it will also increase
the amount of speckling in your images.
Streaking may also be visible in shots of scenes such as
the night sky.
Choose the sensitivity setting that best suits the conditions.
G
!
When you specify a high sensitivity, the amount of noise
(interference) in the image shown on the LCD monitor
before the shot is taken increases. However, this is
normal and does not indicate a fault.
G
!
The digital zoom cannot be used in high-sensitivity photography.
If you select a photography mode other than " W " when a
high sensitivity setting is selected, the resolution reverts
to the setting specified just before the sensitivity was set.
✽ Selecting |/W (➡P.41)
✽ Displaying the menus (➡P.42)
High-sensitivity photography (800 or 1600)
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
４９ ４９
When a high sensitivity (800 or 1600) is set, " &
or " * " appears on the LCD monitor and the
resolution is automatically set to " 1 ". If you try to
1
select a resolution other than " " when a high
sensitivity setting is selected, " & " or " *
flashes and the resolution remains unchanged.
3
"
"
49