Table of Contents
Advertisement
VOICE
PERF
Performance Record
You can record your keyboard performance in the Performance mode to a Song or Pattern. A part of the Knob
operations, the Controller operations, and Arpeggio playback as well as your keyboard playing in the Performance
mode can be recorded to the specified Track as MIDI events. For information on the recorded Knob operations, see the
"Sequencer Block applied to the Performance mode"
[PERFORM] Performance selection [REC]
Operation
NOTICE
Performance recording overwrites all Tracks of the destination Song or Pattern Section. Please check whether or not the
destination Song or Pattern Section contains data before recording. You can check whether or not each Track contains data at
the Track status line on the display. Select a Song or Pattern Section containing no data as the destination or save all Song/
Pattern data to an external USB flash memory device before recording.
[F1] SETUP
SeqMode (Sequencer Mode)
Determines to which destination (Song or Pattern) your Performance playing will be recorded.
Settings:
song, pattern
Number (Song/Pattern Number)
Determines the Pattern or Song number as the destination for recording.
Section
Determines the Section as the destination for recording when the Sequencer Mode is set to "pattern." Keep in mind that
the data recorded to the selected destination Section will be overwritten and erased as soon as recording starts.
Section Length
Specifies the length of the Section when the Sequencer Mode is set to "pattern."
Settings:
001 – 256
Time Signature (Meter)
Determines the time signature.
Settings:
1/16 – 16/16, 1/8 – 16/8, 1/4 – 8/4
Tempo
Determines the tempo for recording. While recording, the Arpeggio is played back at the tempo set here.
Settings:
5 – 300
NOTE
If you are using this instrument with an external sequencer, DAW software, or MIDI device, and you want to synchronize it with
that device, set the "MIDI Sync" parameter in the Utility MIDI display
to "auto" (only when MIDI clock is transmitted continuously) or "external," the Tempo parameter here indicates "external" and
cannot be changed.
NOTE
This setting is copied to the tempo for the record destination (a Song/Pattern).
NOTE
This parameter can be set also by holding the [SHIFT] button and pressing the [ENTER] button several times repeatedly at the
desired tempo. This function is referred to as "Tap Tempo."
[SF1] ARP1 (Arpeggio 1) – [SF6] ARP6 (Arpeggio 6)
The Arpeggio types are assigned to the buttons with 8th note icons on the display tab. You can call them up by pressing
these buttons any time during your keyboard performance. Selects the Arpeggio setting before recording. The
Arpeggio Type can be set in the Arpeggio Edit display
MOX6/MOX8 Reference Manual
SONG
PATTERN
MIX
(page
11).
(page
58).
MASTER
REMOTE
(page
149) to "external" or "auto." When "MIDI Sync" is set
UTILITY
QUICK SET
FILE
Performance Mode
Performance Play
[F1] PLAY
[F2] VOICE
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Performance Edit
Common Edit
[F1] GENERAL
[F2] OUT/MFX
[F3] MEQ
[F4] USB I/O
[F5] A/D IN
[F6] EFFECT
Part Edit
[F1] VOICE
[F2] OUTPUT
[F3] EQ
[F4] TONE
[F5] RCV SW
Performance Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Performance Record
[F1] SETUP
[F2] REC TR
[F3] OTHER
[F5] CLICK
[F6] INFO
Supplementary Information
72
Hide quick links:
Advertisement
Table of Contents
