Yamaha MOX8 Reference Manual page 103

VOICE PERF
[F5] REMIX
This function gives you a variety of semi-random presets for dividing the MIDI sequence data and altering the note
lengths, letting you create completely new variations of a Pattern. Set the parameters below, then press the [ENTER]
button to execute the Remix operation. If you want to keep the changes, press the [SF5] OK button. To return to the
original display without altering the data, press the [SF4] CANCEL button.
NOTE
Since the remixed data is stored as a new Phrase and assigned to the current Track, the original Phrase data remains as an
unassigned Phrase.
Type
Determines how the data in the selected Track will be divided and rearranged. The division and rearrangement rules are
different for each remix type.
Settings:
1 – 16
Var (Variation)
Determines how the original MIDI sequence data will be modified.
Settings:
Normal 1 – 16, Roll 1 – 16, Break 1 – 16, Fill 1 – 48
Normal 1 – 16 .... The original data is sliced and rearranged only. 16 variations are available.
Roll 1 – 16.......... In addition to rearrangement of the divided data, some portions of the data may be played with a roll effect.
16 variations are available.
Break 1 – 16 ...... In addition to division and rearrangement, some portions of the data may be deleted to create breaks.
16 variations are available.
Fill 1 – 48 .......... In addition to rearrangement of the divided data, some portions of the data may be played with a roll effect.
48 variations are available.
Interval
Determines the measure(s) to which Remix is applied. For example, when set to "1," Remix is applied to all measures.
When set to "2," Remix is applied to the data of every 2nd measure: 2, 4, 6, 8, and so on. When set to "3," Remix is
applied to the data of every 3rd measure: 3, 6, 9, 12, and so on.
Settings:
1 – 8
[F6] CHAIN
NOTE
For instructions, see the "Quick Guide" of the Owner's Manual.
Pattern Chain Play
[PATTERN]  [F6] CHAIN
Operation
This mode lets you play the programmed Section chain sequence created in Pattern Record and Pattern Edit. The
parameters are the same as in the [F1] PLAY display
Pattern Chain Record
Pattern Chain Record Standby mode
[PATTERN]  [F6] CHAIN  [REC]
Operation
You can select one of the following Tracks for recording.
• patt (Pattern): Records Section changes during playback
• tempo: Records tempo change information during playback
• scene: Records Track mute settings during playback
MOX6/MOX8 Reference Manual
SONG PATTERN MIX
(page 101).
MASTER REMOTE
Recording Track
UTILITY QUICK SET FILE
Pattern Mode
Pattern Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F4] PATCH
[F5] REMIX
[F6] CHAIN
Pattern Record
Pattern Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
During Pattern Recording
[F1] SETUP
[F3] RESET
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Pattern Edit
[F1] CHANGE
[F2] VIEW FLT
[F5] INSERT
[F6] DELETE
Pattern Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] PHRASE
[F5] TRACK
[F6] PATTERN
Supplementary Information
103