Yamaha MOX8 Reference Manual page 152

VOICE PERF
Quick Setup 3 (Drct Arp)
 "Audio"="Config2"
This setting is same as Quick Setup 1.
 "MIDI"= "Config3"
Use this setting when recording this instrument's performance including Arpeggio data to the DAW software.
Keep in mind that this is for recording Arpeggios for which "KeyMode" is set to "direct," "sortdirect," or
"thrudirect."
LocalCtrl MIDI Sync
on auto
Quick Setup 4 (St Alone)
 "Audio"="Config2"
This setting is same as Quick Setup 1.
 "MIDI"="Config4"
Use this setting when this instrument is to be used alone or as the master clock source for other equipment.
LocalCtrl MIDI Sync
on internal
Quick Setup 5 (VST Rec)
 "Audio" = "Config4"
Use this setting when using the MOX6/MOX8 Editor VST to record MIDI data to the DAW software.
Mode DirectMonitorSw A/D In
VST On
 "MIDI" = "Config1"
This setting is same as Quick Setup 1.
Quick Setup 6 (VST Play)
 "Audio" = "Config1"
Use this setting when using the MOX6/MOX8 Editor VST to play this instrument sound on the DAW software.
Mode DirectMonitorSw A/D In
VST On
 "MIDI" = "Config1"
This setting is same as Quick Setup 1.
[F2] AUDIO
Determines the audio signal settings for the selected Config. These settings are same as in the [F5] USB I/O display
(page 147) in the Utility mode. To switch among Config 1 – 6, use the [SF1] – [SF6] buttons.
[F3] MIDI
Determines the parameters related to the connections to an external MIDI device. The function of each editable
parameter is same as the following parameters. To switch among Config 1 – 6, use the [SF1] – [SF6] buttons.
LocalCtrl (Local Control)
Utility mode  [F6] MIDI  [SF2] SWITCH  "LocalCtrl"
MIDI Sync
Utility mode  [F6] MIDI  [SF2] SYNC  "MIDI Sync"
ClockOut
Utility mode  [F6] MIDI  [SF2] SYNC  "ClockOut"
TrIntSw (Track Internal Switch)
Song /Pattern mode  [F3] TRACK  [SF2] OUT SW  "INT SW"
TrExtSw (Track External Switch)
Song /Pattern mode  [F3] TRACK  [SF2] OUT SW  "EXT SW"
ArpOutSw (Arpeggio Output Switch)
Performance/Song/ Pattern mode  ARP [EDIT]  [F6] OUT CH  "OutputSwitch"
KBDTransCh (Keyboard Transmit Channel)
Utility mode  [F6] MIDI  [SF1] CH  "KBDTransCh"
MOX6/MOX8 Reference Manual
SONG PATTERN MIX
ClockOut ArpOutSw
off all on
ClockOut ArpOutSw
on all off
DirectMonitorSw Part
On
DirectMonitorSw Part
off
(page
MASTER REMOTE
KBDTransCh TrIntSw
1 all on
KBDTransCh TrIntSw
1 all on
(page 149)
(page 149)
149)
(page 78)
(page 78)
(page
(page 148)
UTILITY QUICK SET
Quick Setup
TrExtSw
all on
TrExtSw
all on
58)
FILE
[F1] SETUP
[F2] AUDIO
[F3] MIDI
152