Yamaha MOX8 Reference Manual page 108

VOICE PERF
06: Thin Out
Same as in Song Job. See page
07: Modify Control Data
Same as in Song Job. See page
NOTE
Unlike in Song Job, you cannot select "Tempo" as an Event Type.
08: Beat Stretch
Same as in Song Job. See page
[F4] PHRASE (Phrase Job)
01: Copy Phrase
This Job copies a selected Phrase to the designated
destination Phrase. After specifying the source Pattern/Phrase,
and the destination Pattern/Phrase, as well as setting the
checkboxes as necessary, press the [ENTER] button to
execute this Job.
NOTICE
Any previous data in the copy destination will be overwritten.
02: Exchange Phrase
This Job exchanges or "swaps" the contents of two specified Phrases ("A" and "B").
03: Mix Phrase
This Job mixes all data from two selected user Phrases ("A" and
"B"), and places the result in Phrase B.
04: Append Phrase
This Job appends one Phrase (A) to the end of another (B) to
create one longer Phrase (B).
05: Split Phrase
This Job splits a selected Phrase (A) into two separate Phrases (A
and B). Phrase A is divided at the Split Point. The data before the
split point is stored to the original Phrase A and the data after the
split point is moved and stored to Phrase B. You can also set the
Meter of Phrases A and B after the Split Phrase Job is executed.
NOTE
When either Pattern or Phrase is set to "off," the split Phrase B data
is erased.
NOTICE
The job overwrites any data already existing in destination Phrase B.
MOX6/MOX8 Reference Manual
SONG PATTERN MIX
93.
93.
93.
MASTER REMOTE
Selects the Pattern and Phrase to be copied.
(Preset Phrases also can be selected.)
Specify the destination Pattern and Phrase.
Phrase A Phrase B
Mix Phrase
Phrase B
Phrase A
Append Phrase
Phrase B
Phrase A is divided at the Split Point
Phrase A
Phrase A Phrase B
UTILITY QUICK SET FILE
Pattern Mode
Pattern Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F4] PATCH
[F5] REMIX
[F6] CHAIN
Pattern Record
Pattern Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
During Pattern Recording
[F1] SETUP
[F3] RESET
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Pattern Edit
[F1] CHANGE
[F2] VIEW FLT
[F5] INSERT
[F6] DELETE
Pattern Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] PHRASE
[F5] TRACK
[F6] PATTERN
Supplementary Information
108