Viewing The Current Scheme; Selecting A Different Power Scheme; Customizing Power Schemes; Setting Password Protection Upon Exiting Standby - HP ProBook 5320m - Notebook PC User Manual

Viewing the current scheme

Click the Power Meter icon in the notification area, at the far right of the taskbar.
▲
– or –
Select Start > Control Panel > Performance and Maintenance > Power Options.

Selecting a different power scheme

Click the Power Meter icon in the notification area, at the far right of the taskbar, and then select
▲
a power scheme from the list.
– or –
a. Select Start > Control Panel > Performance and Maintenance > Power Options.
b. Select a power scheme from the Power schemes list.
c. Click OK.

Customizing power schemes

1. Select Start > Control Panel > Performance and Maintenance > Power Options.
2. Select a power scheme from the Power schemes list.
3. Modify the Plugged in and Running on batteries settings as needed.
4. Click OK.

Setting password protection upon exiting Standby

To set the computer to prompt for a password when the computer exits Standby, follow these steps:
1. Right-click the Power Meter icon in the notification area, and then click Adjust Power
Properties.
2. Click the Advanced tab.
3. Select the Prompt for password when computer resumes from standby check box.
4. Click Apply.

Using external AC power

External AC power is supplied through one of the following devices:
WARNING!
a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
●
Approved AC adapter
●
Optional docking device or optional expansion product
Connect the computer to external AC power under any of the following conditions:
To reduce potential safety issues, use only the AC adapter provided with the computer,
Using external AC power 49