System Diagnostics Menu; System Configuration Menu - HP ProBook 5320m - Notebook PC User Manual

Select
TPM Embedded Security
Automatic DriveLock
Disk Sanitizer
System IDs

System Diagnostics menu

Select
System Diagnostics menu

System Configuration menu

NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select
Language
Boot Options
To do this
Enable/disable support for Trusted Platform Module (TPM)
Embedded Security, which protects the computer from
unauthorized access to owner functions available in
Embedded Security for ProtectTools. For more information,
refer to the ProtectTools software Help.
NOTE: You must have a setup password to change this
setting.
Enable/disable Automatic DriveLock support.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive or the drive in the upgrade bay.
CAUTION: If you run Disk Sanitizer, the data on the selected
drive is destroyed permanently.
Enter a user-defined computer asset tracking number and
ownership tag.
To do this
●
F1 System Information—Displays the following
information:
◦
Identification information for the computer and the
batteries in the system.
◦ Specification information for the processor, memory
size, system ROM, video revision, keyboard
controller version, and wireless identification
numbers.
● F2 Start-up Test—Verifies the system components
needed for starting the computer.
●
F3 Run-In Test—Runs a comprehensive check on
system memory.
● F4 Hard Disk Test—Runs a comprehensive self-test on
any hard drive in the system.
●
F5 Error Log—Displays a log file if any errors have
occurred.
To do this
Change the Computer Setup language.
● Set a Startup Menu delay (in seconds).
●
Enable/disable Custom Logo (disabled by default).
Computer Setup menus 121