Initiating And Exiting Hibernation; Using Power Schemes; Viewing The Current Scheme - HP Mini 210-1008VU User Manual

Initiating and exiting Hibernation

The system is set at the factory to initiate Hibernation after 30 minutes of inactivity when running on
battery power or when the battery reaches a critical battery level.
NOTE: The system will not initiate Hibernation when running on external power.
NOTE: To reduce the risk of information loss, periodically save your work.
Power settings and timeouts can be changed using Power Options in Windows Control Panel.
To initiate Hibernation:
1. Select Start > Turn Off Computer.
2. Hold down the
– or –
If the computer is on, briefly slide the power switch.
▲
To exit Hibernation:
Briefly slide the power switch.
▲
When the computer exits Hibernation, the power light turns on and your work returns to the screen where
you stopped working.
NOTE: If you have set a password to be required when the computer exits Hibernation, you must enter
your Windows password before your work will return to the screen.

Using power schemes

A power scheme is a collection of system settings that manages how the computer uses power. Power
schemes can help you conserve power and maximize computer performance.
The following power schemes are available:
●
Portable/Laptop (recommended)
● Home/Office Desk
● Presentation
●
Always On
●
Minimal Power Management
●
Max Battery
You can change the settings of these power schemes through Power Options.

Viewing the current scheme

Click the Power Meter icon in the notification area, at the far right of the taskbar.
▲
– or –
Select Start > Control Panel > Performance and Maintenance > Power Options.
16 Chapter 3 Power management
shift key and select Hibernate.