Optical drive cable
Description
Optical drive cable (includes cable bracket)
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
Remove the optical drive cable:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the optical drive cable and cable bracket
to the base enclosure.
2.
Remove the cable bracket (2) and cable (3).
Battery on page
38), and then remove the following components:
WLAN module on page
Hard drive on page
50)
Keyboard on page
56)
Top cover on page
59)
Speakers on page
67)
USB board on page
69)
Power connector cable on page
Display assembly on page
System board on page
46)
71)
73)
82)
Component replacement procedures
Spare part number
685084-001
85