HP OmniBook 800 - Notebook PC User Manual page 71

RAM card
Try replacing its battery.
Try reformatting the card using FORMAT.
The card may be defective, or it may not be supported—contact the
card manufacturer or Hewlett-Packard.*
Modem card
Check the COM name for the card slot—use the CardView icon in
Program Manager (OmniBook group), or in OmniBook Tools click
Connections and COM Ports. (If you have two serial-type cards
inserted, the COM names are reassigned starting with the upper slot
if you turn the OmniBook off and on. COM3 is never available for a
second card.)
Check the phone line connection.
Check the modem settings in the communications application. There
are typically several settings that affect communications.
See the manual for your card or for the communications application
for any special setup requirements.
If this doesn't help, see other suggestions about serial
communications under
Problems".
The card may be defective, or it may not be supported—contact the
card manufacturer or Hewlett-Packard.*
Network card Check for messages from your network software that may indicate
the problem.
Check the physical network connection, or check any indicators on
the network card.
If possible, use another computer to verify the network is working
properly at your connection.
Contact your network administrator.
Check that you have the correct setup in Windows for Workgroups.
For hardware support, use the Windows Setup icon (Main group). For
software support, use the Network Setup icon (Network group). See
their online Help.
Check that you installed any special software supplied with the card.
See the card manual and network software manual for special
information about setting up network cards and network software on
your type of network.
Check that the network card interrupt isn't the same as an interrupt
used by a serial (COM) port you're using—use the CardView icon in
Program Manager (OmniBook group). You can change the network
card interrupt, shut down the serial communications, or reassign the
serial port names.
See the Windows Quick Start manual for other network information.
The card may be defective, or it may not be supported—contact the
card manufacturer or Hewlett-Packard.*
"Serial and Infrared Communications
71