5.4 Hard Drive
Hard Drive Spare Part Number Information
Hard drives (all 4200 rpm; include hard drive bracket, rubber hard drive
spacer, and hard drive cable)
80 GB
60 GB
40 GB
30 GB
1. Prepare the computer for disassembly (refer to
2. Loosen the two Phillips PM2.0×5.0 screws 1 that secure the
hard drive cover to the computer.
3. Lift the front edge of the hard drive cover 2 and swing it up
and to the back.
4. Remove the hard drive cover.
✎
The hard drive cover is included in the Plastics Kit, spare part
number 412764-001.
Removing the Hard Drive Cover
Maintenance and Service Guide
Removal and Replacement Procedures
438385-001
412774-001
412773-001
412772-001
Section
5.3).
5–7