HP Nc2400 - Compaq Business Notebook Maintenance And Service Manual page 128

Removal and Replacement Procedures
7. Turn the computer display-side up with the front toward you.
8. Open the computer as far as it will open.
9. Remove the Torx8 T8M2.5×7.0 screw 1 that secures the
display ground cable to the computer.
10. Disconnect the display cable 2 from the system board.
11. Remove the wireless antenna cables 3 from the Mini Card
compartment and the top cover clips.
Disconnecting the Display Cable and Removing the Wireless
Antenna Cables
5–36 Maintenance and Service Guide