Replacing The Memory Module - HP Mini 110-3700 Getting Started Manual

4. Grasp the tab on the hard drive cable connector (3), and then carefully press the hard drive
cable connector onto the system board until it snaps into place.
5. Replace the vanity cover (refer to
6. Replace the battery (refer to
7. Reconnect external power and external devices.
8. Turn on the computer.

Replacing the memory module

The computer has one memory module slot. The capacity of the computer can be upgraded by
replacing the existing memory module in the memory module slot.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
To replace the memory module:
1. Remove the battery (refer to
2. Remove the vanity cover (refer to
3. Remove the existing memory module:
a. Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
Inserting the battery on page
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
Removing the battery on page
Replacing the vanity cover on page
Removing the vanity cover on page
26).
24).
25).
26).
Replacing the memory module 29