Adding Or Replacing Memory Modules; Adding Or Replacing A Memory Module In The Expansion Memory Module Slot - HP Pavilion dv3-2200 - Entertainment Notebook PC User Manual

Adding or replacing memory modules

The computer has one memory module compartment, which is located on the bottom of the computer.
The memory capacity of the computer can be upgraded by adding a memory module to the vacant
expansion memory module slot or by upgrading the existing memory module in the primary memory
module slot.
WARNING!
and remove all batteries before installing a memory module.
CAUTION:
procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
NOTE: To use a dual-channel configuration when adding a second memory module, be sure that both
memory modules are the same size.
Adding or replacing a memory module in the expansion memory module
slot
The expansion memory module slot is stacked above the primary memory module slot. To add or replace
a memory module in the expansion memory module slot, follow these steps:
1. Save your work.
2. Shut down the computer and close the display.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing
the power button. Then shut down the computer through the operating system.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery from the computer.
7. Loosen the 3 memory module compartment cover screws (1).
94 Chapter 9 Memory modules
To reduce the risk of electric shock and damage to the equipment, unplug the power cord
Electrostatic discharge (ESD) can damage electronic components. Before beginning any