Using The Stand - Insignia NS-PDP42 User Manual

Using the stand

To use the stand:
1 Place your plasma TV face down on a
cushion or soft cloth to protect the screen.
2 Push the two locks on the stand outward.
3 Pull the stand out, then unfold the stand.
4 Insert and tighten the two provided screws
into the holes on the bottom of the stand.
6
5 When you connect cables to your plasma TV,
Closing the stand for storage
To close the stand for storage:
Lock
1 Remove the two screws from the bottom of
2 Pull out on the two hooks on the bottom of
3 Push the two locks on the bottom of the stand
Positioning your plasma TV
When you position your plasma TV, make sure
that you leave 4 inches (10.16 cm) of space on
all sides.
Screw
www.insignia-products.com
Insignia NS-PDP42 42" Plasma TV-720P
do not disengage the lock. Your plasma TV
might fall causing damage to your plasma TV
or bodily injury.
the stand.
Hook
the stand, then fold the stand into the back of
your plasma TV.
outward.
4" (10.16 cm)
Lock
Lock
Screw
4" (10.16 cm)