Setting Up Your Tv; Installing The Stand (42" Tv Only); Managing The Cables; Mounting The Tv On A Wall - Insignia NS-PDP42 User Manual

Setting up your TV

Installing the stand (42" TV only)

To install the stand:
1 Carefully place the TV, screen side down, on
a cushioned surface to protect the screen
from damage.
2 Secure the stand to the bottom of the TV with
the four bolts (provided), using the holes in
the back (shown in the illustration) of the TV.

Managing the cables

To manage the cables:
1 Connect the cables as necessary. To connect
additional equipment, see "Connecting
external equipment" on page 10.
1
2 Install the cable management clip to route the
cables. If your TV has cable holders, install
them to bundle the cables.
8
Cable holder
Cable management clip
www.insignia-products.com
Insignia NS-PDP42/50-09 42" and 50" Plasma TV
To remove the cable management clip:
Warning
Do not grip the cable management clip when
moving the TV because it may break or separate
from the TV, causing the TV to fall. This could
result in possible injury or damage to your TV.
• For the 42" TV, press the cable management
clip, then hold it with both hands and pull it
upward.
Note to reviewers: Please explain. The
source document was not clear on this
process.
• For the 50" TV, hold the cable management
clip with both hands and pull it backward.
Note to reviewers: Please explain. The
source document was not clear on this
process.

Mounting the TV on a wall

This TV accepts VESA FDMI-compliant mounts
using the four screw holes on the back of the TV.
These mounts are sold by third parties and not
available from Insignia. Refer to the instructions
included with the mount for more information.
Note
The screw length required depends on the wall
mount used. Refer to the instructions included
with the wall mount.
To install a wall mount bracket:
1 Remove the stand by performing the stand
installation instructions in reverse.
2 Install the included protection cover over the
hole for the stand.
3 Mount the wall bracket to the TV, using the
screw holes indicated in the illustration.
15.75 in (400 mm)
15.75 in
(400 mm)