Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket - Insignia NS-55E790A12 User Manual

Installing the stand or
wall-mount bracket
Notes
If you plan to wall-mount your TV, do not install the
stand.
Store the stand and stand screws in case you decide
to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the stand to the screen with the four
provided screws.
Model
NS-55E790A12
6
Screw type Screw length
M6 type 12 mm
www.insigniaproducts.com
NS-55E790A12 Insignia 55" LED-LCD HDTV, 120 HZ 1080p

Installing a wall-mount bracket

Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket with a suitable
weight/load rating. (See "Miscellaneous" on page 52.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the stand,
then remove the stand.
3 Secure the flat stand cover to the back of your
TV using the four screws you just removed.
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
15.68 in. (400 mm)
Wall mount brackets