Service Access Cover - HP LW350UA#ABA Maintenance And Service Manual

Service access cover

Description
Plastics Kit (contains only the service access cover)
Before removing the service access cover, remove the battery (see
1. Position the computer upside down, with the front toward you.
2. Loosen the two Phillips 4.0 x 2.0 captive screws (1) that secure the service access cover to the
computer.
3. Remove the service access cover (2).
Reverse this procedure to install the service access cover.
ENWW
Spare part number
640889-001
Battery on page
Component replacement procedures
40)
41