Table of Contents
Advertisement
6.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the module (1) as far as the module cable allows. (The module is
attached to the display enclosure with double-sided tape.)
b.
Disconnect the module cable (2) from the module.
c.
Remove the webcam/microphone module (3). The webcam/microphone module is available
using spare part number 646138-001.
7.
If it is necessary to replace the hinge covers:
a.
Remove the two Phillips PM2.5×5.0 (1) screws that secure the hinge covers to
the display enclosure.
70
Chapter 4 Removal and replacement procedures
Advertisement
Table of Contents
