Table of Contents
Advertisement
Top cover
NOTE:
The top cover spare part kit includes the TouchPad and TouchPad cable.
Description
Top cover in pewter finish (includes TouchPad and TouchPad cable)
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the keyboard (see
When replacing the top cover, be sure that the following components are removed from the defective
top cover and installed on the replacement top cover:
●
Power button board and cable (see
●
TouchPad button board and cable (see
Remove the top cover:
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
3.
Remove the eight Phillips PM2.5×6.0 screws on the surface of the base enclosure that secure
the top cover to the computer.
56
Chapter 4 Removal and replacement procedures
Battery on page
43).
Optical drive (select models only) on page
Keyboard on page
53).
Power button board on page
TouchPad button board on page
Spare part number
646845-001
44).
59)
60)
Advertisement
Table of Contents
