Power Save; Software Installation; The Software Components - FujiFilm FinePix A403 Owner's Manual

g POWER SAVE
SET–UP
ＳＥＴーＵＰ ＳＥＴーＵＰ １／２ １／２
ＯＮ ＯＮ
ＩＭＡＧＥ ＤＩＳＰ． ＩＭＡＧＥ ＤＩＳＰ．
ＯＮ ＯＮ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ ＳＥＴ
ＬＣＤ ＬＣＤ ＯＮ ＯＮ
ＢＥＥＰ ＢＥＥＰ
ＬＯＷ ＬＯＷ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
hPower saving "ON" (default setting)
Power consumption is kept to a minimum to
prevent battery depletion. Select the "ON"
setting when you are using alkaline batteries.
iIf the camera is not used for approximately 30
seconds, the LCD switches off temporarily to reduce
power consumption (Sleep mode).
iOnce the camera is in Sleep mode, if it is left
unused for a further 90 seconds, it is automatically
switched off.
iThe charging time for the flash increases slightly
because the flash charging power is reduced.
hPower saving "OFF"
Batteries are more likely to run flat since no
power reduction measures (sleep mode, etc.)
are used. However, this function automatically
switches the camera off if the camera is not
used for approximately 2 minutes.
68
To bring the camera out of sleep mode so that it
is ready to shoot, press "d", "c", "a" or "b".
This is useful since the camera is ready to shoot
more quickly than when it is switched off and
then on again. You can also take pictures when
the camera is in sleep mode simply by pressing
the shutter button.
G
!
Power Save/Auto Power Off does not function when
a USB connection is being used.
G
!
You can also bring the camera out of sleep mode by
pressing buttons other than "d", "c", "a" or "b".
G
!
To switch the camera back on, briefly switch the
camera off and then on again.
The Sleep function does not operate when the
LCD monitor is switched off, while you are
setting the quality mode or when the camera is
in SET–UP or Playback mode. However, if the
camera controls are not used for 2 minutes, the
camera automatically switches off.

6 Software Installation

6.1 The Software Components

USB Mass Storage
Driver
Allows a digital camera to be used
Connect the camera
as USB Mass Storage (removable
with "DSC" selected as
disk drive, card reader).
the USB setting
(➡P.87).
Exif Launcher
Launches the FinePixViewer
software when a camera is
connected.
Acrobat Reader R R
Software used to read PDF-format documents on a personal computer. This software is needed to read the
User's Guides for FinePixViewer (Macintosh only).
QuickTime
Software needed for playing back movies, etc.
✽ Note that the software configuration differs slightly depending on your operating system.
FinePixViewer
Allows you to display thumbnail lists of the images
stored on your PC or in the camera, print the
images individually or as an index, display the
images at full size and perform some basic image
processing.
ImageMixer VCD RAW FILE
for FinePix CONVERTER LE
Creates a FinePix CD Album "Used when you open
(Mac OS X is not supported). RAW files that were
photographed on cameras
that support the RAW file
format."
6
69