Power Management; G Ovf Power Save Mode; H Quick Start Mode; The Optical Viewfi Nder - FujiFilm FINEPIXX100 Owner's Manual

Power Management

Power Management
The setup menu contains the following power management options. For information on using the
setup menu, see the previous page.

G OVF POWER SAVE MODE

G
OVF POWER SAVE MODE
Selecting ON for G OVF POWER SAVE MODE
approximately doubles the number of photo-
graphs that can be taken with a fully-charged
battery.
R Selecting ON increases the time required for auto-
focus to about 0.4 seconds, compared to about 0.2
seconds when OFF is selected (the time required to
focus varies with the subject).
R When power saving is in eff ect, shooting informa-
tion is not displayed until the shutter button is
pressed halfway.
Q Power saving is available only when the optical
viewfi nder is used.
22

H QUICK START MODE

H
QUICK START MODE
To reduce camera startup time, select ON for
H QUICK START MODE.
R ON reduces startup time to about 0.7 seconds, com-
pared to about 2.2 seconds when OFF is selected.
Q The camera will need 2.2 seconds to start up if it is
left off for more than about 20 minutes.
Q The camera requires slightly longer to start up when
a short focus distance is selected for manual focus.
Q Selecting ON increases the drain on the battery, re-
ducing the number of pictures that can be taken on
a single charge.