■ SET-UP menu options
Settings
Display
IMAGE DISP.
ON/OFF
POWER SAVE
2 MIN/5 MIN
1
FORMAT
§ BEEP
LOW/HIGH/OFF
DATE/TIME
TIME
DIFFERENCE
2
qLCD
ON/OFF
FRAME NO.
CONT./RENEW
¶/qWEB/
USB MODE
3
VIDEO SYSTEM
NTSC/PAL
DISCHARGE
4
qRESET
Factory default
ON
2 MIN
OK
–
LOW
SET
–
SET
–
ON
CONT.
¶
¢
ENGLISH
–
OK
–
OK
–
Explanation
Specifies whether an image checking screen (photography result)
appears after taking a picture.
The image appears for a few moments and then recorded.
Reduces the camera's power consumption and to subsequently
turn the camera off when not being used. See P.50 for details.
Erases all files. See P.50 for details.
Sets the volume of the tone emitted when the camera controls
are used.
Corrects the date or time. See P.13 for details.
Specifies the time difference settings. See P.51 for details.
Specifies whether the LCD monitor is ON or OFF when the
camera is turned on in Photography mode.
Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.52 for details.
Selects the function when the camera is connected to a PC.
See P.61 for details.
Specifies the language used for LCD monitor display.
Specifies whether video output is set to NTSC or PAL.
Discharges rechargeable batteries. See P.76 for details.
Resets all the camera settings (other than the DATE/TIME, TIME
DIFFERENCE LANG. and VIDEO SYSTEM) to the factory
default values set at shipment. A confirmation message appears
when you press "c". To reset the camera settings, press the
"MENU/OK" button again.
4
49