Dos Flash Utility - Acer Aspire V3-551 Service Manual

DOS Flash Utility

NOTE:
Plug the AC power adaptor to a power source before performing the DOS Flash Utility.
Perform the following to use the DOS Flash Utility:
Copy the DOS mode flash files to the USB HDD.
1.
Press F2 during boot to enter the BIOS Setup Utility.
2.
Select Boot menu to modify the boot priority order.
3.
Move the USB HDD to position 1 (refer to
4.
Information Main
Boot priority order:
1. Network Boot : BRCM MBA Slot 0200 v15.0.11
2. USB FDD :
3. HDD0 : TOSHIBA MK7559GSXP
4. USB HDD :
5. USB CDROM :
6. ATAPI CDROM : MATSHITABD-CMB UJ160
F1 Help
Exit
Esc
Insert the USB HDD and reboot the computer.
5.
Enter the BIOS folder.
6.
System Utilities
InsydeH20 Setup Utility
Security Boot
Select Item F5/F6
Select Menu
Enter
Figure 2:13. Changing the BIOS Boot Priority Order
C:\ROMs\Q5Wx8100\DOS>dir
Volume in drive C is ISS_4GB
Volume Serial Number is 3666-33A4
Directory of C:\ROMs\Q5Wx8100\DOS
. <DIR>
.. <DIR>
FLASHIT EXE 102,912 07-19-2011
Q5Wx8100 BAT 321 04-03-2012
Q5Wx8100 FD 4,194,304 04-03-2012
K74E100A ROM 131,072 04-03-2012
MIDCHK EXE 14,164 01-11-2011
5 file(s)
2 dir(s) 2,524,848,128 bytes free
Figure 2:14. Flash files
Boot on page 2-10).
Exit
Change Values
Select Sub-Menu
06-04-2010 14:31 .
06-04-2010 14:31 ..
2:24 FLASHIT.EXE
14:32 Q5Wx8100.BAT
14:31 Q5Wx8100.FD
13:10 K74E100A.ROM
16:52 MIDCHK.EXE
4,442,773 bytes
Item Specific Help
Use < > or < > to select a device, then
press <F5> to move it down the list, or
<F6> to move it up the list. Press <Esc>
to escape the menu
F9 Setup Defaults
F10 Save and Exit
Rev. 3.7
2-14