DOS Flash Utility
Perform the following to use the
F2
1. Press
during boot to enter Setup Menu.
2. Select Boot Mode to 'Legacy'.
3. Select Boot Priority Order to modify the boot priority order.
Boot Mode :
Secure Boot :
Boot priority order:
1. Windows Boot Manager
2. HDD : ST9500325AS
3. USB FDD :
4. Network Boot-IPV4 :
5. USB HDD :
6. USB CDROM :
7. Network Boot-IPV6 :
Figure 2-12. BIOS Boot
4. Open "Formal" folder in BIOS version folder.
ZQK_100.EXE
5. Copy
6. Insert the USB HDD and reboot computer.
ZQK_100.EXE
7. Execute
8. Flash process begins as shown in
2-14
DOS Flash Utility
Example: If using USB HDD to Update BIOS, move USB HDD to position 1.
to a bootable USB HDD.
under DOS mode to update BIOS.
0
:
[Legacy BIOS]
[Enabled]
Figure
2-13.
3.7
Item Specific Help
Use <↑> or <↓> to select a
device, then press <F5> to
move it down the list, or <F6>
to move it up the list. Press
<Esc> to escape the menu
System Utilities