To Install The 3Com Power Management Tdi Service; To Disable Automatic Cd-Rom Detection - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

1. Use Windows Explorer to view the LAN subdirectory. If that directory is not on your
2. Double-click on TDIINST.EXE
Note
1. From Start Menu, click Run.
2. Enter REGEDT32 then click OK.
Using Windows NT 4.0
Installing Retail Windows NT 4.0
5. After reboot, click Next to run the PC Card Diagnostics.
6. Make sure there are no PC Cards installed in the HP notebook and click Next to start
the Diagnostics.
7. Click Finish to reboot.
After reboot, the PC Card icon appears on the Taskbar.

To install the 3Com Power Management TDI service

You will need to install the 3Com NT Power Management TDI service if you use
Suspend or Hibernate states while connected to the LAN. Make sure the HP Mobile
Enhancements are installed previously.
local hard-drive, copy it NOW! Installation will fail otherwise.
To uninstall the 3Com Power Management TDI service:
1. Select Network from the Control Panel, select the Services tab, select the 3Com NT
Power Management TDI Service, and click Remove.
2. Click Yes when asked "Do you wish to continue?"
3. Close the Network Properties window.
4. When prompted, select Yes to restart your computer.
The TDI source files should be installed from a local hard drive. The TCAPTDI.INF
file must remain in the LAN subdirectory in order for uninstall to work.

To disable automatic CD-ROM detection

Windows NT 4.0 will automatically detect and respond when you insert a CD-ROM.
However, this prevents the notebook from automatically turning off after a period of
inactivity if a CD-ROM is present. To disable this feature:
160 Corporate Evaluator's Guide