To Enable The Infrared Port - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

Using Windows 98
Installing Retail Windows 98 Second Edition
10. Click Next.
11. Another dialog box will appear asking what you would like Windows to do. Select
the default "Search for the best driver for your device" and click Next to continue.
12. In the next dialog box, there will be an option to "Specify a location". Select this and
click "Browse" to browse to the TRACKPNT subdirectory on the Recovery CD.
Once you have located the drivers, select Next to continue.
13. Select "Install one of the other drivers", click View List to select the "IBM PS/2
TrackPoint" and OK to confirm. Click Next to continue installation.
14. Click Next.
15. Click Finish in the "Update Device Driver Wizard" window. Close the System
Device window and reboot your system.

To enable the infrared port

Before you use your infrared port to transfer files or to print to an infrared printer, you
must enable the infrared port in the BIOS. Follow these steps to use either the standard
infrared driver or the enhanced driver.
Follow these steps to install IR drivers:
1. Reboot the computer and enter Setup by pressing F2.
2. Go to the System Device page inside Setup and enable the infrared port.
3. Save the setup changes and exit.
4. Right-click on Network Neighborhood and select properties.
5. Select IrDA v3.0 Fast Infrared Port and click Properties.
6. Click the Advanced tab and set the Value for Infrared Transceiver A to HP HSDL-
2300.
7. Click OK to exit IrDA Fast Infrared Properties.
8. Click OK to exit Network Properties.
9. Click OK to restart.
140 Corporate Evaluator's Guide