To Install Mobile Enhancements - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

Using Windows NT 4.0
Installing Retail Windows NT 4.0
2. Double-click the Network icon.
3. Select the Adapters tab.
4. Select 3Com 10/100 Mini PCI Ethernet Adapter.
5. Click Update and provide the path to the updated driver.
To uninstall the 3Com LAN driver
Sometimes previous or unfinished installations leave problems that affect network
adapter operation. If the driver installation is unsuccessful for any reason, your best
course may be to remove the software and repeat the driver setup procedures.
1. Click Start, Settings, Control Panel.
2. Double-click the Network icon.
3. Select the Adapters tab.
4. Select the 3Com 10/100 Mini PCI Ethernet Adapter and click Remove.
5. Click OK then reboot and reinstall the driver.
Note
If you go beyond this simple procedure and remove all networking components,
remember to reinstall using the procedure for Driver Installation with No Networking
Installed. Be sure to reinstall Service Pack 3 or later after reinstalling the network
adapter.

To install mobile enhancements

The HP Notebook Mobile Enhancements add the following capabilities to
Windows NT 4.0:
• Advanced Power Management (APM).
• Plug and Play for PC Cards.
The following applications:
• Phoenix CardExecutive for Windows NT 4.0.
• Phoenix APM for Windows NT 4.0.
You need to install the HP Notebook Mobile Enhancements for Windows NT 4.0 for
both the retail and factory installation.
158 Corporate Evaluator's Guide