Viewing Images; Camera Connection; Using The Ac Power Adapter (Sold Separately); Connecting To A Tv - FujiFilm FinePix A120 Owner's Manual

6 Viewing

6.1 CAMERA CONNECTION

Images
6.1.1 Using the AC power adapter ( sold separately )
Always use a FUJIFILM AC Power Adapter AC-3V (➡P.69).
Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading
photographed images to the computer. You can take pictures and play back images without
worrying about depleting the batteries.
●
!
Only connect or disconnect the AC power adapter when the camera is off.
Connecting or disconnecting the AC power adapter while the camera is on temporarily interrupts the power supply to the
camera, so that images or movies being shot are not recorded. Failing to turn the camera off first can also result in
damage to the xD-Picture Card or malfunctions during PC connection.
DC IN 3V
socket
AC-3V
(sold separately)

6.1.2 Connecting to a TV

1
VIDEO OUT
(Video output ) socket
AC-3V (sold separately)
2
To video
input socket
58
Check that the camera is turned off. Plug the AC
power adapter connector into the "DC IN 3V"
socket and then plug the AC power adapter into the
power outlet.
●
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
●
!
The shape of the plug and socket-outlet depends on the
country of use.
Do not connect the AC power adapter to charge the
AA-size nickel-metal hydride batteries. Please use
the optional charger (➡P.69).
Turn off the camera and TV. Plug the Video cable
(provided with the camera) into the "VIDEO OUT"
(video output) socket.
●
!
When there is a power outlet available, connect the AC
Power Adapter AC-3V.
Plug the other end of the cable into the video input
socket on the TV. Then turn the camera and TV on
and playback images as you would normally.
●
!
Images are only sent to the TV in Playback mode.
●
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
●
!
The image quality for movie playback is lower than for still
images.
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
FOR PRINTING IMAGES ( PictBridge FUNCTION )
If a printer that supports PictBridge is available, images can be printed by connecting the camera
directly to the PictBridge-compatible printer without using a computer.

6.2.1 Specifying images for printing on the camera

1
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
１ 2 ３ 4
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
言語 ／ＬＡＮＧ 言語 ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ ＥＮＧＬＩＳＨ
ＶＩＤＥＯ ＳＹＳＴＥＭ：ＮＴＳＣ ＶＩＤＥＯ ＳＹＳＴＥＭ
ＮＴＳＣ
ＤＩＳＣＨＡＲＧＥ ＤＩＳＣＨＡＲＧＥ ：ＯＫ ＯＫ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2
USB socket (mini-B)
AC-3V (sold separately)
3
ＵＳＢ ＵＳＢ
ＣＨＥＣＫＩＮＧ ＵＳＢ ＣＨＥＣＫＩＮＧ ＵＳＢ
4
0 1 2 0
ＰＩＣＴＢＲＩＤＧＥ ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＳＥＴ ＳＥＴ
¢
Set to " " in the "USB MODE" setting in the
"SET-UP" menu (➡P.45).
●
!
Do not connect to a PC when the "USB MODE" setting is set
to " ¢ ". See P.77 if you connect to PC by mistake.
1 Connect the camera to the printer using the USB
cable (mini-B).
2 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-3V (sold
separately) to your camera.
●
!
Use an xD-Picture Card that was formatted on the camera.
Press the "Playback" button for approx. 1 second to
turn the camera on in Playback mode.
ç
" " appears and then the menu
screen is displayed.
●
!
If the menu screen does not appear, check whether the USB
" ¢ ".
mode setting is
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select " u PRINT DPOF".
2 Press the "MENU/OK" button.
●
! " "
When appears, the DPOF settings are
not specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix A120 beforehand (➡P.32).
●
!
Even when "WITH DATE" is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
Continued
6
59