Initializing Memory
2. Memory Initialization
(1) Press the [ON/OFF] button while pressing [1] and [*].
(2) [100] → [START] button
(3) When "ARE YOU SURE?" appears, press the [INITIALIZE] button.
(4) After the display has changed from "TESTMODE 100" to "TEST MODE CL", shut down the equipment by
pressing the [ON/OFF] button until a sound is audible.
(5) Turn on the power again.
Setting Dial Type
3. Dial Type Selection (except Europe)
(1) [USER FUNCTIONS] → [ADMIN] → [PASSWORD] → "Admin Password" (default: 123456) → [OK] →
[FAX] → [INITIAL SETUP] → Next page
(2) Select the DIAL TYPE button.
(3) Press [OK].
11 / 11
GD-1340
45564401EE Rev.1