When the:
Ready/Data light is on
Ready/Data light is blinking
Toner Low light is on
Load Paper light is on
Paper Jam light is on
Error light is on
Press Continue light is on
Error light and Press Continue light
are both on
Setting up a print job
Once your printer is set up and your drivers are installed, you are ready to print.
For example, if you have plain paper loaded in tray 1, but you want to print a letter on letterhead paper and
an envelope:
1.
Load letterhead with the top of the page pointing down facing you in tray 1.
2.
3.
The printer:
Is ready to receive and process data.
Is busy receiving or processing data.
Alerts you that the toner is getting low.
Prompts you to load media in tray 1, manual feed, or the optional
250-sheet tray (if installed).
Detects a jam.
Cover is open or the toner cartridge is not installed.
Prompts you to press Continue to resume printing.
Alerts you that a secondary error occurred.