Print Media Guidelines - Dell 810 All In One Inkjet Printer User Manual

User's guide
Table of Contents

Advertisement

Operating system
Windows 2000
Windows XP
Windows XP Professional x64 Edition

Print Media Guidelines

 
Load up to:
Make sure:
100 sheets of plain paper
NOTE:
20 sheets of banner paper
NOTE:
jam. See
 10 envelopes
NOTE:
stamp in the lower right corner or with landscape orientation with the stamp in the lower left corner. If you are mailing
internationally, print landscape orientation with the stamp in the upper left corner.
 25 greeting cards, index
cards, postcards, or photo
cards
 50 sheets of photo or
glossy paper
 10 iron-on transfers
NOTE:
 25 transparencies
NOTE:
Cables
 
Your Dell™ All-In-One Printer 810 uses a Universal Serial Bus (USB) cable (sold separately).
Processor
Pentium 233
Pentium 300
Windows XP Professional x64 Edition-compatible PC
The paper is loaded vertically against the right side of the paper support.
l
The paper guide rests against the left edge of the paper.
l
Load letterhead paper with the top of the letterhead entering the printer first and facing up.
You select Automatic, Draft, Normal, or Photo print quality.
l
You remove any paper from the paper support before inserting banner paper.
l
You place a stack of banner paper on or behind the printer, with only the number of sheets required.
l
You must select A4 Banner or Letter Banner paper size in Printing Preferences. Failure to do so will cause a paper
Paper
Problems.
You load the leading edge of the banner paper into the printer against the right side of the paper support.
l
The paper guide rests against the left edge of the paper.
l
You use banner paper designed for inkjet printers.
l
The print side of the envelopes faces up.
l
The envelopes are loaded vertically against the right side of the paper support.
l
The stamp location is in the upper left corner and printed with landscape orientation.
l
For Japanese customers: If you are mailing within Japan, the envelope can be printed with portrait orientation with the
The paper guide rests against the left edge of the envelopes.
l
You select the correct envelope size. Select the next biggest size if the exact envelope size is not listed, and set the left
l
and right margins so that your envelope text will be correctly positioned.
The print side of the cards faces up.
l
The cards are loaded vertically against the right side of the paper support.
l
The paper guide rests against the left edge of the cards.
l
You select Automatic, Draft, Normal, or Photo print quality.
l
The glossy side of the paper faces up.
l
The paper is loaded vertically against the right side of the paper support.
l
The paper guide rests against the left edge of the paper.
l
You select Automatic, Draft, Normal, or Photo print quality.
l
You follow the loading instructions on the packaging.
l
The blank side of the transfer faces up.
l
The transfers are loaded vertically against the right side of the paper support.
l
The paper guide rests against the left edge of the transfers.
l
You select Automatic, Normal, or Photo print quality.
l
For best results, iron-on transfers should be fed one sheet at a time.
The rough side of the transparencies faces up.
l
The transparencies are loaded vertically against the right side of the paper support.
l
The paper guide rests against the left edge of the transparencies.
l
You can load a single transparency into the paper support without removing plain paper.
You select Automatic, Draft, Normal, or Photo print quality.
l
RAM (MB)
Hard disk (MB)
128
500
128
500
256
500

Advertisement

Table of Contents
loading

This manual is also suitable for:

810

Table of Contents