2.
Put on your 3D glasses. If needed, adjust the glasses using the nose pieces
provided.
3.
The 3D glasses turn on automatically when the 3D content begins to play
and the infrared (IR) signal is detected. Your lenses may darken, or you may
see flickering while the glasses start operation.
If you can see clearly in 3D, the setup is complete and you can begin
viewing 3D cinema content!
NOTE:
and 3D Cinema Technology operate may cause flickering or interfere with
the operation of the glasses. This can be avoided by dimming or turning off
the lights.
WARNING!
stop using 3D Cinema Technology. Refer to the 3D safety information and
consult a physician if you suspect a physical problem seeing stereoscopic
3D.
16
Chapter 2 Using HP 3D Cinema Technology
NOTE:
Insert the disc into the optical drive until it clicks into place. To
eject the disc, press the optical drive eject key located at the top right
of the keyboard.
Differences in the frequencies at which the lighting in your room
If you still cannot see 3D content, remove the 3D glasses and