Configuring Broadcast Storm Control
Use the Broadcast Storm Control Configuration screen to enable
broadcast storm control for any port on the switch, as shown
below.
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Parameter
Broadcast control on
all ports
Threshold
Broadcast Control
Broadcast Storm Control Configuration : Unit 1 Port
======================================
Broadcast control on all ports :
Port
-------------------------------------------------------
1
2
3
4
5
6
7
8
9
10
11
12
Use <TAB> or arrow keys to move. <Enter> to select
Description
Allows you to enable/disable broadcast storm
control for all ports on the switch.
The packet-per-second threshold at which
broadcast control will be employed on the port.
(Default is 500 pps.)
Enables/disables broadcast control for the port.
When enabled, the switch will employ a broadcast-
control mechanism if the packet-per-second
threshold is exceeded. This mechanism limits the
amount of broadcasts passed by the port to half of
the received packet-per-second count. The control
mechanism remains in effect until the number of
received broadcasts falls back below the
packet-per-second threshold.
(Default is Enabled.)
U
S
SING THE
YSTEM
Threshold
500
500
500
500
500
500
500
500
500
500
500
500
C
ONFIGURATION
[Enable]
Broadcast Control
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
P
ROGRAM
1 - 12
[Disable]
2-47