SMC Networks Barricade SMCWGBR14-N User Manual page 74

Time Zone
Select your local time zone from pull down menu.
Enable Daylight Saving
Check this option if your location observes daylight saving time.
Daylight Saving Offset
Select the time offset, if your location observes daylight saving time.
DST Start and DST End
Select the starting and ending times for the change to and from daylight saving
time. For example, suppose for DST Start you select Month="Oct", Week="3rd",
Day="Sun" and Time="2am". This is the same as saying: "Daylight saving starts
on the third Sunday of October at 2:00 AM."
Automatic Time Configuration
Enable NTP Server
Select this option if you want to synchronize the router's clock to a Network
Time Server over the Internet. If you are using schedules or logs, this is the best
way to ensure that the schedules and logs are kept accurate.
NTP Server Used
Select a Network Time Server for synchronization. You can type in the address
of a time server or select one from the list. If you have trouble using one server,
select another.
Set the Date and Time Manually
If you do not have the NTP Server option in effect, you can either manually set the
time for your router here, or you can click the Copy Your Computer's Time
Settings button to copy the time from the computer you are using. (Make sure that
computer's time is set correctly.)
If the router loses power for any reason, it cannot keep its clock running, and will
not have the correct time when it is started again. To maintain correct time for
schedules and logs, either you must enter the correct time after you restart the
router, or you must enable the NTP Server option.
71