SMC Networks Barricade SMCWGBR14-N User Manual page 33

Add/Edit Virtual Server
In this section you can add an entry to the Virtual Servers List below or edit an
existing entry.
Enable
Entries in the list can be either active (enabled) or inactive (disabled).
Save
Saves the new or edited virtual server entry in the following list. When finished
updating the virtual server entries, you must still click the Save Settings button
at the top of the page to make the changes effective and permanent.
Virtual Servers List
The section shows the currently defined virtual servers. A Virtual Server can be
changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you
click the Edit icon, the item is highlighted, and the "Edit Virtual Server" section is
activated for editing.
You might have trouble accessing a virtual server using its public identity
(WAN-side IP-address of the gateway or its dynamic DNS name) from a
machine on the LAN. Your requests may not be looped back or you may be
redirected to the "Forbidden" page.
This will happen if you have an Access Control Rule configured for this LAN machine.
The requests from the LAN machine will not be looped back if Internet access is blocked at
the time of access. To work around this problem, access the LAN machine using its
LAN-side identity.
Requests may be redirected to the "Forbidden" page if web access for the LAN machine is
restricted by an Access Control Rule. Add the WAN-side identity (WAN-side IP-address of
the router or its dynamic DNS name) on the
this problem.
Advanced → Web Filter screen to work around
30