USER GUIDE EZ Switch 10/100/1000 24+2G Port Unmanaged Fast Ethernet Switch SMCFS2601...
Page 2
EZ Switch 10/100/1000 User Guide From SMC’s EZ line of low-cost workgroup LAN solutions 20 Mason May 2011 Irvine, CA 92618 SMC-UG-0511-01 Phone: (949) 679-8000...
Page 3
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC.
ARRANTY AND RODUCT EGISTRATION To register SMC products and to review the detailed warranty statement, please refer to the Support Section of the SMC Website at http://www.smc.com. – –...
OMPLIANCES AND AFETY TATEMENTS FCC - C LASS This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
BOUT UIDE URPOSE This guide details the hardware features of the switch, including the physical and performance-related characteristics, and how to install the switch. UDIENCE The guide is intended for use by network administrators who are responsible for installing and setting up network equipment; consequently, it assumes a basic working knowledge of LANs (Local Area Networks).
ONTENTS ARRANTY AND RODUCT EGISTRATION OMPLIANCES AND AFETY TATEMENTS BOUT UIDE ONTENTS NTRODUCTION Overview Features IEEE 802.1p QoS ARDWARE ESCRIPTION Front Panel Port and System Status LEDs RJ-45 Ports Rear Panel AC Power Socket NSTALLING THE WITCH Package Contents Precautions Safety Requirements Location Requirements Installation...
Page 10
ONTENTS Cabling Guidelines Connecting to PCs, Servers, Hubs and Switches ROUBLESHOOTING Diagnosing Switch Indicators The Power LED is Off The Link/Act LED is Off when a Device is Connected to the Corre- sponding Port Power and Cooling Problems Installation PECIFICATIONS Physical Characteristics –...
NTRODUCTION VERVIEW The SMCFS2601 switch provides 24 10/100 Mbps auto-negotiating RJ-45 ports and 2 10/100/1000 Mbps auto-negotiating RJ-45 ports. Each port on the switch supports auto MDI/MDI-X, which eliminates the need for crossover cables or uplink ports. The switch is plug-and-play; any port can be connected to a server, a hub, or a switch, using straight-through or crossover cable.
TC1 has the highest priority of the two priority queues, while TC0 has the lowest priority. The SMCFS2601 switch uses Weighted Robin Round (WRR) for scheduling. The WRR queue-scheduling algorithm schedules all the queues in turn with every queue assured a certain service time.
This chapter describes the front panel, rear panel, and LED indicators of the switch. RONT ANEL The front panel of SMCFS2601 consists of switch LED indicators, 24 10/100 Mbps RJ-45 ports and 2 10/100/1000 Mbps RJ-45 ports. Figure 2: SMCFS2601 Switch Front Panel GIGA1...
Each port also supports IEEE 802.3x auto-negotiation of flow control, so the switch can automatically prevent port buffers from becoming saturated. ANEL The rear panel of the switch features the AC power socket. Figure 3: SMCFS2601 Switch Rear Panel 100-240V~ 50/60Hz 0.6A AC P OWER...
Before installing the switch, verify that you have all the items listed under “Package Contents.” If any of the items are missing or damaged, contact your local SMC distributor. Also be sure you have all the necessary tools and cabling before installing the switch.
| Installing the Switch HAPTER Precautions RECAUTIONS To ensure long-term and stable performance of the switch, pay attention to the following before installation. AFETY EQUIREMENTS Before cleaning the switch, disconnect the power supply. Do not clean the ◆ switch using a wet cloth, and never use any other liquid for cleaning. Take waterproof measures during storage, transportation and operation of ◆...
| Installing the Switch HAPTER Installation Position the switch away from water and moisture sources, be sure to ◆ provide an operating environment that is within the temperature and humidity specifications. NSTALLATION This switch can be either installed in a standard 19-inch mountable rack or located on a desktop.
| Installing the Switch HAPTER Installation Upturn the switch and set in the desired location, making sure there is enough ventilation space on all sides for proper air flow Connect the switch to a power source with the provided power cord. See “Powering On”...
Connect the switch to a power source with the provided power cord. See “Powering On” on page OWERING The SMCFS2601 switch is powered by connecting to an AC power supply using a power cord. When powering on the switch, it automatically initializes and the LED indicators respond as follows: All of the LED indicators flash momentarily for one second, which represents a resetting of the system.
| Installing the Switch HAPTER Connecting Network Devices ONNECTING ETWORK EVICES The switch is designed to be connected to network cards in PCs and servers, as well as to other switches and hubs. ABLING UIDELINES The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so you can use standard straight-through twisted-pair cables to connect to any other network device (PCs, servers, switches, routers, or hubs).
ROUBLESHOOTING IAGNOSING WITCH NDICATORS OWER Make sure the AC power cord is connected to the switch and power source ◆ properly. Make sure the power source is ON. ◆ FF WHEN A EVICE IS ONNECTED TO THE ORRESPONDING Make sure that the cable connectors are firmly plugged into the switch and ◆...
| Troubleshooting PPENDIX Installation NSTALLATION Verify that all system components have been properly installed. If one or more components appear to be malfunctioning (such as the power cord or network cabling), test them in an alternate environment where you are sure that all the other components are functioning properly.
Page 25
| Specifications PPENDIX Physical Characteristics OWER UPPLY 100 to 240 V, 50-60 Hz, 0.6A IMENSIONS 44 x 18.0 x 4.4 cm (17.4 x 7.11 x 1.73 in) EIGHT 2.4 Kg (5.28 lbs) EATURE Auto–MDI/MDIX Green Saving IEEE 802.1p QoS EMPERATURE Operating: 0 °C to 40 °C (32 to 104 °F) Storage: -40 °C to 70 °C (-40 to 158 °F) UMIDITY...