Security - Siemens CF62 User Manual

Security

KmK
§Menu§ Security
K
Select function
The phone and SIM card are protected
against misuse by several security
codes.
Direct call
(Phone-code protected)
Only one phone number can be
dialled. To do this hold down the right
soft key (page 23).
Only
‚
(PIN2 protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
Last 10 only
(Phone-code protected)
Only phone numbers from the call
list of "dialled numbers" (page 38)
can be dialled. This list can be filled
with phone numbers specifically for
this purpose.
First delete the call list, then create
"new entries" by dialling phone num-
bers and cancelling before the con-
nection is established.
Codes
PIN control,
Change
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a
different SIM card, enter the phone
code when requested.
b
Barrings
Barring restricts the use of your SIM
card (this is not supported by all serv-
ice providers). You need a 4-digit
password which your service provider
will give you. You may need to be
registered separately for each barring.
All outgoing
All outgoing calls except emergency
numbers are barred.
b
Outgo internat
(International outgoing)
Only national calls can be made.
Out.int.x home
(International outgoing without
home country)
International calls are not permitted.
However you can make calls to your
home country when abroad.
Setup
Change PIN,
phonecode, (page 15).
75
Change PIN2,
b
b