Siemens CF62 User Manual page 98

Problem Possible causes
Text message Service provider does not sup-
cannot be sent. port this service.
Phone number for service cen-
tre not set or incorrect.
SIM card contract does not
support this service.
Service centre too busy.
Recipient does not have a com-
patible phone.
EMS pictures & Destination phone does not
sounds are not dis- support the EMS standard.
played on the des-
tination phone
No Internet ac- Incorrect WAP profile set, or
cess possible. wrong or incomplete settings.
PIN error/ Three wrong entries.
PIN2 error.
Phone code error. Three wrong entries.
Service provider No authorisation for this serv-
Code error. ice.
Too few/too many Functions may have been add-
menu entries. ed or deleted by the service
provider via the SIM card.
No fax possible. Wrong settings in the PC.
No authorisation for this
service.
Charge meter Charge pulse is not transmit-
does not work. ted.
Damage
Severe shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry con-
wet. nector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle the
phone!
Reset all settings to factory default (page 76):
Questions & Answers
Possible solution
Contact your service provider.
Set service centre (page 48).
Contact your service provider.
Repeat message.
Check.
Check settings or contact your service provider.
Enter the PUK (MASTER PIN) supplied with the SIM
card according to the instructions. If the PUK (MAS-
TER PIN) has been lost, please contact your service
provider.
Contact Siemens Service (page 98).
Contact your service provider.
Check with your service provider.
Check settings (page 74).
Contact your service provider.
Contact your service provider.
A
*
# 9 9 9 9 #
97