Specifications - Sharp CD-BA250 Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
„ General
Power source AC 120 V, 60 Hz
Power consumption 128 W
Dimensions Width: 270 mm (10-5/8")
Height: 330 mm (13")
Depth: 340 mm (13-7/16")
Weight 6.3 kg (13.8 lbs.)
„ Amplifier
Output power RMS: 150 W (75 W + 75 W) (10 % T.H.D.)
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals Video/Auxiliary (audio signal): 500 mV/47 kohms
„ CD player
Type 3-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 1-bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
„ Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
„ Cassette deck
Frequency response 50 - 14,000 Hz (Normal tape)
Signal/noise ratio 55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter 0.3 % (WRMS)
„ Speaker
Type 2-way type speaker system
5 cm (2") Tweeter
10 cm (3-15/16") Woofer
Maximum input power 150 W
Rated input power 75 W
Impedance 6 ohms
Dimensions Width: 220 mm (8-11/16")
Height: 330 mm (13")
Depth: 217 mm (8-9/16")
Weight 3.0 kg (6.6 lbs.)/each
ENGLISH E-28