Using The Organizer For The First Time; Entering Characters - Sharp ZQ-P20 Operation Manual

Electronic organizer
Table of Contents

Advertisement

Using the Organizer for the First Time

Be sure to perform the following operations before using the Organizer
for the first time.
1. Remove the isolating film that is
affixed to the battery holder on the
back of the unit.
2. Press the RESET switch with a stylus.
"RESET?" is displayed.
3. Tap f and press x to initialize
the Organizer.
After "RESET!" is displayed. You have
now cleared the memory contents.
The Select Language screen then appears.
Guidance messages can be displayed in 10
languages – English, Italian, German, French,
Spanish, Portuguese, Hungarian, Czech,
Polish, and Greek. After initializing the
Organizer, the default setting is English.
Select the desired language using > or
<, then press x.
Home clock is displayed. (See "Clock Mode".)
NOTES
• If the Organizer is subject to strong, extraneous electrical noises or
shocks during use, an abnormal condition may occur in which no
OFF
keys (including
) will respond. Press the RESET switch, tap
ON
f , then press x to delete all the memory contents.
• To minimize battery consumption, the Organizer is designed to
automatically turn off when no key has been pressed for approxi-
mately 5 minutes.
2
• The key touch tone is turned on and off by tapping h
select "KEY TONE?" using > or < , and press x.
Select on/off using > or < , then press x. When the
tone is activated, " " will appear.
Touch Keyboard
Alphabet entry mode
• Each time f is tapped, the touch keyboard switches between the
RESET
Alphabet entry mode and the Number entry mode.
To tap the touch keys, use the attached stylus.
• Tap towards the center of each key.
• Numbers, alphanumeric letters, symbols, and "+ – × ÷ ."
can be entered into the dot display area (the 1st line).
• Numbers and some characters (only space, –,
F, and P in Telephone mode) can be entered into the number display
area (the 2nd and the 3rd lines).
• Letters are entered in capital letters ("CAPS" is turned on). To enter
lowercase letters, tap
Entering symbols and letters with an accent mark
• To enter a symbol, tap
appears:
@#$£¥

Entering Characters

Number entry mode
to turn "CAPS" off.
CAPS
repeatedly until the desired symbol
SMBL
( )~': / \_&<>ß!? ¡¿æµ¢
,
MENU

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents