Checking The Recording Mode; At The Set Time; If There Is Not Sufficient Space On A Memory Card; If Power Outage Happens/Ac Cord Or Dc Plug At The Lcd Tv Set Is Unplugged During Recording - Sharp AQUOS LC-20B5E Operation Manual

Setting Timer Recording (Continued)

Checking the Recording Mode

Press Cyan.
R e m a i n s t i l l
S P / R e m a i n i n g
T i m e 2 : 1 5
1 M o n o
• If you turn the power off using B
control while timer recording is set, both picture and
sound go off at the preset recording start time and
then the recording will start. (The recording also starts
at the set time as well, when the power is on.)
X (MAIN POWER)
NOTE
• If you turn the power off using X X X X X (MAIN POWER) on the LCD TV
set, timer recording will not work.
• When the recording mode is switched to "SP", "LP", "EP" or "FIT"
the remaining recording time will change accordingly.
• You cannot pause the timer recording.
• You cannot switch channels during timer recording.
• The clock cannot be adjusted while timer recording is set.
• When the Card Eject button is pressed and the card is removed
during timer recording standby, the recording will take place as set
when a card is reinserted.
40
1 7
0 0
T i m e 0 : 3 5
B B on the remote B
B
When timer recording is set: Orange
When recording: Red
During standby: Green

At the Set Time

• Starts recording with the channel and the mode you
have set, and stops at the end time.
• Do not remove the card during recording. Otherwise,
problems may occur, causing the data including those
previously recorded not to be recorded or kept properly.
If There Is Not Sufficient Space On a
Memory Card
• Recording stops when the card runs out of free space.
• Make sure that there is enough space on a card,
because timer recording can be set, like with VCRs,
without taking free space in account.
If Power Outage Happens/AC Cord or DC
Plug at the LCD TV Set is Unplugged
During Recording
• Because the recording is not completed under normal
conditions, the file cannot be stored while unnecessary
data remains in the memory card. To delete unneces-
sary data, select "Delete file" in "Edit" and proceed to
delete the file. (See page 45.)
• Start formatting the card after saving necessary files to
a PC or other external media. All data and files are
deleted upon format.