Av Connections - Sharp AQUOS LC-20B5E Operation Manual

Useful Features (Continued)

AV Connections

It is possible to manually adjust various settings for connec-
tions with external devices on the "AV connections" screen.
[1] AV1/AV2
Select the appropriate signal type and colour standard for
the signals from the video equipment connected to the
AV1 or AV2 terminal.
1
Press MENU to display the Menu screen.
2
Press \/| to select "Setup".
3
Press '/" to select "AV connections", and press OK.
M e n u [ S e t u p
S e t u p
P r o g r a m m e s
F i r s t i n s t a l l a t i o n
R o t a t e
A V c o n n e c t i o n s
C l o c k s e t u p
L a n g u a g e
D e m o
4
Press '/" to select "AV1", "AV2(Y/C)", or
"AV2(CVBS)", and press OK.
M e n u [ S e t u p M e n u [ S e t u p
A V 1
A V 2 ( Y / C )
A V 2 ( C V B S )
F o r progra mmes
5
Press '/" to select the desired item, and press \/|
: SELECT O K : ENTER
to make the adjustment. (See the following table for
details.)
M e n u [ S e t u p M e n u [ S e t u p
A V 1
A V 2 ( Y / C )
A V 2 ( C V B S )
F o r progra mmes
6
Press END to exit.
: SELECT O K : ENTER
26
c o n n e c t i o n s ]
A V
A V c o n n e c t i o n s ]
A d j u s t s e t t i n g
S i g n a l t y p e A u t o
A F C M o d e 1
C o l o u r s y s t e m S e c a m
M : BACK E : EXIT
A V A V c o n n e c t i o n s ] c o n n e c t i o n s ]
A d j u s t s e t t i n g
S i g n a l t y p e A u t o
A F C M o d e 1
C o l o u r s y s t e m S e c a m
M : BACK E : EXIT
Adjustment item Choice
Signal type* Auto, CVBS, Y/C
AFC Mode1, Mode2
Colour system Auto, PAL,
SECAM, N358
(NTSC 3.58),
N443 (NTSC
4.43), PAL-M,
PAL-N, PAL60
* "Signal type" is only visible when the AV1 is selected.
NOTE
• If no (colour) image is displayed, try to change to a different signal
type.
• Depending on the compatibility with the various types of
equipment, the picture may become skewed. In this case, select
the "AFC" (Automatic Frequency Control) mode that will improve
the picture.
• Switching between AV input signals may be slow, depending on
the settings in "Colour system". If you want to speed up signal
switching, switch "Auto" in "Colour System" to the current reception
colour system.
[2] For programmes
• It is possible to select AV control voltage and the RGB
signal for programme positions 1 to 199.
• When connecting a video device to the AV1 terminal,
you need to adjust the decoder programme settings.
1
Perform steps 1 to 3 in [1] AV1/AV2 to display "AV
connections" screen.
2
Press '/" to select "For programmes", and press OK.
M e n u [ S e t u p M e n u [ S e t u p A V A V c o n n e c t i o n s ] c o n n e c t i o n s ]
A V 1
A V 2 ( Y / C )
A V 2 ( C V B S ) A V C o n t r o l
F o r progra mmes
R G B s e l e c t
F o r d e c o d e r
S o u n d
3
Press '/" to select the "AV Control voltage" or "RGB
: SELECT O K : ENTER M : BACK
select".
4
Press \/| to select "yes" or "no".
NOTE
• After one or both items are set to "yes", and when AV control
voltage or RGB signal is input, the appropriate image is received
for all programme positions 1 to 199.
Description
To select the signal type of
external equipment.
To select frequency control
modes. Mode1 is suitable for
DVD players or decoders, and
Mode2 is suitable for VCRs or
Camcorders.
Colour norm.
A d j u s t s e t t i n g
v o l t a g e
n o
< n o >
c o n n e c t e d t o
f r o m A V 1 < D e c . >
E : EXIT
A V 1