Part Names Of Main Unit - Sharp AQUOS LC-20B5E Operation Manual

Part Names of Main Unit

Controls
Upper control panel
Speaker
OPC sensor
Remote sensor
NOTE
• TV/VIDEO, CH ( )/(
remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.
8
), i (–)/(+) (Volume) and MENU on the main unit have the same functions as the same buttons on the
X (MAIN POWER)
TV/VIDEO
MENU
CH ( )/( )
i (–)/(+) (Volume)
Card Lamp
When timer recording is set: Orange
When recording: Red
During standby: Green
PC Card Slot
Speaker
Headphone jack
Plug the headphone mini-plug into the Headphone jack
located on the front of the LCD TV set. (See page 6.)
OPC indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green when the
"Backlight" is set to "Auto (OPC)". (See page 21.)
STANDBY/ON indicator
STANDBY/ON indicator lights up green when the power is on,
and red when in the standby mode (the indicator will not light
when the main power is off). The indicator blinks red when the
LCD TV set receives the remote control signal, and orange
when the wake-up timer is set (the indicator will lights when in
the standby mode).
How to adjust the angle
Tilt the display by grabbing onto
the carrying handle while securely
holding down the stand with your
other hand.
To change the vertical angle of the LCD TV
set, tilt the screen up to 5 degrees forward
or 10 degrees backward. The LCD TV set
can also be rotated up to 25 degrees to right
and left. Please adjust the angle so that the
LCD TV set can be watched most comfort-
ably.