Input Label; Colour System Setting (For Tv/Av Input Mode); Colour System - Sharp Aquos LC-37GD1E Operation Manual

Useful adjustment settings

Input Label

You can assign each input source a label you like.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Input Label", and then
press OK.
4
Press a/b/c/d to select each character
of the new name for the channel, and then
press OK.
DVD
A B C D
K L M N
U V W X
0 1 2 3 4 5 6 7 8 9
5
Repeat the above until the name is fully spelt
out, and then press OK.
• The name can be 6 characters or less.
INPUT SOURCE
TV
DTV
NOTE
• You cannot change labels if the INPUT SOURCE is TV,
DTV or CARD.
E F G H I J CLEAR
O P Q R S T BACK
Y Z + – . _
END
INPUT1
INPUT2
DVD
INPUT4
INPUT5 INPUT5
CARD
(Example)
Colour system setting (for TV/AV
input mode)
u can change the colour system to one that is
Yo
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Colour System", and
then press OK.
4
Press a/b to select a compatible video
signal system of your equipment, and then
press OK.
• Some items may be greyed out. They are not
selectable.
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• This function is available for AV input mode and TV tuner
mode.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
71