Part Names Of The Main Unit - Sharp Aquos LC-20B6E Operation Manual

Part Names of the Main Unit

Controls
Upper control panel
Speaker
OPC sensor
Remote sensor
NOTE
), i (–)/(+) and MENU on the control panel of the main unit have the same functions as the same buttons on the
• INPUT, CH ( )/(
remote control. (See page 13.) Fundamentally, this operation manual provides a description based on operation using the remote control.
8
(MAIN POWER)
INPUT
MENU
CH ( )/( )
i (–)/(+) (Volume)
Speaker
Headphone jack
Plug the headphone mini-plug into the Headphone jack
located on the front of the LCD TV set. (See page 6.)
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when the "Backlight" is set
to "Auto (OPC)". (See page 28.)
STANDBY/ON indicator
STANDBY/ON indicator lights up green when the power is on,
and red when in the standby mode (the indicator will not light
when the main power is off). The indicator blinks red when the
LCD TV set receives the remote control signal, and orange
when the wake-up timer is set (the indicator will light when in
the standby mode).
How to adjust the angle
Tilt the display by grabbing onto
the carrying handle while securely
holding down the stand with your
other hand.
To change the vertical angle of the LCD TV
set, tilt the screen up to 5 degrees forwards
or 10 degrees backwards. The LCD TV set
can also be rotated up to 25 degrees to right
and left. Please adjust the angle so that the
LCD TV set can be watched most comfort-
ably.