Ais - Navman Tracker 5507 Installation And Operation Manual

Navman chartplotter
Table of Contents

Advertisement

A routes file: The new routes are added to
any existing routes in the 5507/5607. If a new
route has the same name as an existing route
but has different data then the 5507/5607 asks
which route to keep.
A track file: The new track will replace the
existing track in the 5507/5607.
To load a file to the 5507/5607:
1
Select the file to load.
and select Load.
2
Press
Deleting a file from the user card
1
Select the file to delete.
and select Delete.
2
Press
Select Yes to confirm.
3
Reading the file information
This reads the file names from the user card and
displays them. Reading does not load any file data
into the 5507/5607.
and select Card.
1
Press
Select Read.
2

13 AIS

AIS is short for Automatic Identification System.
The International Convention for Safety of Life At
Sea (SOLAS) requires all vessels greater than 300
tons and all passenger vessels to be equipped
with AIS Transponders. All vessels equipped with
AIS permanently broadcast via one or more of the
two dedicated VHF channels. This transmission
may include information about the vessels MMSI-
number, its call sign, name, position, course,
heading, speed, rate of turn and type of vessel.
This unit can receive and display AIS information
when connected to an AIS receiver. Available AIS
vessels transmitting in the local area are show on
the chart when this feature is enabled.
NAVMAN TRACKER 5507/5607 Installation and Operation Manual
Formatting the user card
Formatting prepares a user card for use. Format
the card if there is an error message saying that
the card is not formatted. Any data files on the
card are deleted.
and select Card.
1
Press
Select Format.
2
CAUTION
!
3
Select Yes to confirm.
Sorting the file names
WARNING
!
This sorts the displayed file names.
and select Sort.
1
Press
DANGER
Select sort by Name, Type or Time.
2
CAUTION
Before using a user card, remove any chart
card and plug the user card in. When you have
finished with the user card, remove the user card
and replace the chart card (see section 1-3).
The following AIS receivers are supported by
this unit:
Comar SLR200 (external GPS).
Weatherdock Two Channel AIS Receiver "EASY
AIS", Part No. 5-A-013 (external GPS).
NASA Marine AIS Engine 2 channel Receiver
(external GPS).
Other AIS receivers may work but have not been
tested with this unit.
To enable AIS from the system menu check the
AIS box. (see section 15-1)
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracker 5607

Table of Contents